Last year I replaced a 3 node VMWare+SAN cluster with a 2 node hyperconverged Hyper-V cluster. I’ve been quite impressed with it so far so thought I’d write how I did it – especially considering I did the bulk of the work through Windows Admin Centre.
Before you decide to sit down and do this, be warned it’s not a quick process. If you’re in any doubt you should probably consult a vendor who has the Microsoft certified hardware and expertise available before putting this into production – if you’re fine with setting up complicated things yourself, or it’s for testing, then you’re welcome to come along for the ride. You’ll no doubt waste countless hours trying to get Windows to play with the disk adapters and get the disks into the right mode for S2D, especially if you’re using older hardware, so I’d set aside at least a full day or two.
If you’ve connected Windows Admin Centre to Azure you’ll find a section called Azure Backup. This will allow you to back up your on-site workloads to Azure using the Microsoft Azure Recovery Services agent. It’s ideal for backing up physical servers or individual virtual machines, however if you’re after backing up all the guests on your Hyper-V host you’re better off looking into Azure Backup Server, which runs on the host rather than the guest.
In this post I’m going to look at configuring and backing up a server through Windows Admin Centre, and then at how to recover the data – both for a partial failure (such as some files being deleted but the server still boots) and a total failure.
Windows Admin Centre is a web based server (and desktop) administration package which, eventually, should replace the majority of the work currently done through MMC consoles and snap-ins. If you’ve ever opened Server Manager on a Windows 2019 machine you’ll have seen the popup telling you to “Go get Windows Admin Centre!”. Whilst it’s not there yet, it is constantly being updated and improved and I find it really useful.
It’s a lot more than just managing a couple of systems – when I set up our hyperconverged Hyper-V cluster I primarily did this from within WAC (post to follow on this if I get chance to write it up) – and it integrates nicely with a lot of Azure services (including any Azure VMs you might have)
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.